How to prevent frozen water pipes

water pipes - frozen pipe repair in PhiladelphiaIf you have lived in the Philadelphia area for any length of time you have discovered that frozen pipes can be a major concern. Often this problem creeps up on you while you’re sleeping, then when you go to take a shower… bam… no water. More dreadful is to find out that a burst pipe is pouring water into your kitchen, bath, basement or even attic!

Daniels HVAC in Philadelphia has responded to hundreds of frozen pipe repair calls over its 25 years of dedicated service and we’ve seen everything from a simple leak, all the way to major flood damage. With the escalating costs of insurance, this is an important topic for Philadelphia residents to consider.

 

Here are some useful tips on how to prevent frozen water pipes in your Philadelphia home:

Start with a Comprehensive Inspection

corroded pipe - frozen pipe repair in PhiladelphiaWith Philadelphia being a city that is always seemingly under construction we have quite a range of homes differing in age, location and building structure. Naturally older homes with older pipes are going to be more susceptible to frozen pipes than a modern home. For that reason and inspection of the exposed pipes in your Philadelphia home is a good place to start. When making your inspection, be careful as pipes can be hot and have jagged edges especially near the connections.

Look for signs of discoloration and buildup of sediments that will have a (white, green and/or black) chalky feel and appearance to them. (more likely for galvanized pipes) Take the extra time to completely track all pipes within the home, many older Philadelphia homes have water pipes that will go up and through the attic to access different parts of the home. With these pipes especially, if not properly insulated, are very susceptible to cold temperatures.

If you see any pipes that you feel may be susceptible to bursting or need to inspect pipes that are inaccessible; be sure to call Daniels HVAC in Philadelphia to assist. Our comprehensive maintenance package includes the preventative inspection of water pipes both in and outside your home.

Temperature control

If all of your water pipes are in good structural condition then temperature control is the next step to keep your water pipes from freezing. Making sure that the temperature in your home does not drop below freezing, in certain areas, naturally is the primary solution. Basements and attics that have exposed pipes (and are not traditionally heated) are two of the main areas that we see as trouble spots in the service calls that we make.

By wrapping exposed pipe in insulation and making sure that the temperature in those areas stays regulated above freezing, will be of your first and greatest benefit to prevent the pipes from freezing. Many times, to prevent these areas from getting too cold, Philadelphia residents will use space heaters to regulate the temperature: this is not a practice that is recommended by Daniels HVAC in Philadelphia.

For many basements and attics that have exposed water pipes it may be possible to redirect forced heat ductwork to stabilize the temperature in these areas. This will not make these areas as warm as the rest of your home, but will keep the temperature regulated at around 50° (the optimum temperature to keep pipes from freezing). If you are unsure about affordable and safe ways to heat the areas where the water pipes would be exposed, be sure to contact Daniels HVAC. We’ve been serving Philadelphia residents for over 25 years dealing with situations just like this. We can inspect and prevent burst water pipes by adding appropriate insulation and safe temperature control methods in the vulnerable areas of your home.


Daniels HVAC has been Serving the Philadelphia area for over 25 years. Call today to see the difference experience can make! (267) 971-3639


Exterior Exposure

frozen spigot - frozen pipe repair in PhiladelphiaIt’s the little things that you never think about that usually cause the biggest problems. The main culprit for frozen pipes in your Philadelphia home comes from the outside water spigot. With this exposed metal component extruding from the outside wall it is open and accessible to the full brunt of the cold Philadelphia weather. When the cold temperatures hit, it literally works like a fuse (as pipes are good conductors of both heat and cold) bringing the cold weather into your piping system. If the spigot is directly outside of where your kitchen or bathroom plumbing is located it can have a dual effect freezing both the mainline as well as subsequent lines that are close to the frozen section.

Prevention

Prevention for this particular problem can be solved for less than five dollars. Home-improvement stores carry a spigot insulator cup that can be installed in a matter of seconds. You can also elect to have Daniels HVAC install an interior shut off valve on pipes leading to outside spigots.

How to Fix a Frozen Pipe – Article coming soon!

When Experience Counts

As you can see in this article, as well as our other articles, Daniels HVAC has been faithfully serving Philadelphia for over 25 years. Our vast experience in heating, air-conditioning and plumbing goes beyond our certifications, well into a level of expertise that can only be honed through years of dedicated service on a wide variety of different systems. Locally owned and operated you can trust that we will always give the best price for the highest level of service; taking into account quality parts, manufacture warranties and our own workmanship guarantee.

Useful Links

Learn More about Heater Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

Common Heating Repairs in Philadelphia

Heater Maintenance - Furnace Repair in PhiladelphiaNow that we are squarely in the winter season here in Philadelphia there are several common repairs that we see for heating systems. Chances are that you will have problems with your heater at some time and if you should then Daniels HVAC is here to help. As seen in our previous articles, we like to provide useful tips and information on how to keep your HVAC system running its best as well as things to look out for that can cause more expensive repairs.

In this article were going to address a few of the more common issues that we see during the winter months here in Philadelphia.

Lack of Maintenance and Cleaning

One of the things that leads to premature failure of furnace components is the lack of maintenance and cleaning. When debris builds up in the blower fan or dust contaminants buildup within the igniter and switches it can cause these components to fail. Because most heaters (whether it be an electric furnace, gas furnace or boiler water heater heating system) are positioned in the basement they can be susceptible the dirty conditions that are often associated with the basement environment. We’ve even seen buildup in the heating system components because of clothes dryers that were not vented properly, therefore putting lent materials into the air causing a buildup on the electrical components, motors and igniters.

It is important to make sure that your heater, regardless of the type of system, is free of debris and contaminants that can cause premature component failure. If you hear the warning signs of component failure; such as a squeaky blower motor or rattling sounds, be sure to contact Daniels HVAC in Philadelphia to come out for an inspection and repair before you get left out in the cold.


Daniels HVAC has been Serving the Philadelphia area for over 25 years. Call today to see the difference experience can make! (267) 971-3639


Gas Furnace Ignition Failure

Furnace repair Tech - Furnace Repair in PhiladelphiaOne of the common repairs that we find during the winter months in Philadelphia is ignition failure within a gas furnace. Because these components fire dozens of times a day, these are crucial components to the proper function of your gas furnace. Gas furnaces have a pilot light that ignites the fuel to warm the air with in the combustion chamber, this pilot light is connected to a thermocouple that regulates the gas and will shut the gas off if the pilot light becomes extinguished.

If the pilot light is not functioning then the gas furnace will not produce heat. Components that are prone to fail are the flame sensor, gas control valve and spark igniter; however, proper diagnosis will determine which one is causing the trouble or simply needs to be cleaned and adjusted.

Blower Motor Failure

There are many things that can cause blower motor failure in the electric or gas furnace inside your Philadelphia home or apartment. Often times resulting from either a lack of maintenance or age; the blower motor is the central component that takes the heated air and circulates it through a series of ducts throughout your home. Aside from an electrical short within the motor, the blower motor failure will traditionally present itself ahead of time by making noise as the bearings begin to fail or debris begins to task the unit. Daniels HVAC’s 25 years of service in the Philadelphia area has given us the experience to take care of heaters of all ages and locations. Our unique access to components allows us to repair older furnaces, rather than complete unit replacement; which can save you time and money.

Put our Experience to Work for You!

Daniels HVAC has earned its reputation as the premier heating repair service in Philadelphia. By offering outstanding service, competitive pricing with a value-added mindset we’ve been able to keep Philadelphia comfortable for over 25 years. Whether you need furnace maintenance, furnace repairs or it’s time for a new furnace; give us a call and let us put our 25 years experience to work for you!

Useful Links

Learn More about Heater Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

It’s time to vent

Happy Couple - Heat repair service PhiladelphiaAn overlooked, and often under appreciated, part of your heating and air-conditioning system in Philadelphia is the heater vent. While there are many components to your average forced air heating system such as: fuel source, combustion chamber, igniters, wiring, blower, regulator, rheostat, thermostat and ductwork; the heating vent is actually the one functional piece that allows the entire system to work as designed.

As a professional HVAC company specializing in installation, repair and maintenance of all types of heating systems in the Philadelphia area; Daniels HVAC knows a thing or two about the function and proper use of the heating vents in your Philadelphia home.

Go with the flow

Heating vents that have been professionally installed by a licensed and certified HVAC company such as Daniels HVAC, which is been serving the Philadelphia area for over 25 years; have been strategically placed to allow for the maximum circulation of heat for a forced air heating system. The angle of the vents and placement allows for the forced air heating system to properly distribute the heated air into each room. When properly installing heating vents in a Philadelphia home: the size of the room, the height of the ceiling, angle of the ceiling and wall configuration are taken into consideration so that it will allow for a maximum convection effect that helps to keep the room comfortable and eliminate cool zones.

What are Cool Zones?

Cold Man - Heat repair service PhiladelphiaCool zones can be created when the heating vents have not been properly positioned in the original installation, have been damaged, closed, blocked or redirected. Part of a heating system evaluation performed by Daniels HVAC in Philadelphia would be determining whether any of these conditions exist for the proper direction of forced heated air into the room.

Sometimes the elimination of cool zones is just a matter of properly directing the airflow to meet the needs of the room. Often times when a room addition or structure manipulation, such as moving a wall, is performed by a general contractor they fail to consults a properly licensed, trained and certified HVAC company as to the necessary changes that may be needed for the HVAC system to function as designed.

As a results the original design and placement of the heating vents does not properly provide comfort to the entire room, developing cool zones. If you have recently had any home improvements that have change the overall structure of a room, be sure to have Daniels HVAC in Philadelphia perform a heating system evaluation to help provide cost-saving solutions and provide comfort throughout each room of your home.


Daniels HVAC has been Serving the Philadelphia area for over 25 years. Call today to see the difference experience can make! (267) 971-3639


Keep your heating vents clean and clear

Cleaning Heater Vents - Heat repair service PhiladelphiaMany times the proper use of the heating vent is not considered when placing furniture within the Philadelphia home. Many are more looking for the aesthetics of the room rather than the appropriate flow of heated air. When furniture is placed on top of the heating vents it can significantly change the dynamic of the room allowing it not to be properly heated, additionally increasing your monthly bill because your heating system would have to work harder to maintain the same comfort level. Because many of the heating vents are positioned based upon the principles of convection heating, when furniture is placed, blocks the heating vents, naturally the cycle is broken.

Heating vents can, and do; collect dust, dirt and debris that can build up over a period of time. While independent filters are available for heating vents; the best solution is to remove and clean the heating vents at least twice a year. Because some heating vents are mounted beyond the reach of a standard stepladder, be sure to contact a professional HVAC service or handyman service to safely remove those vents for cleaning and reinstallation.

If the heating vent is damaged to where it is not properly directing the forced air heat to go where it was designed; be sure to replace it with the exact same vent. Changing to a different style vent or decorative vent will naturally change the heating properties that the room was designed to promote.

When experience counts

Daniels HVAC has been providing quality heating and air-conditioning services to the Philadelphia area for over 25 years. As a licensed, trained and certified HVAC specialist, Daniels HVAC has set the standard for quality workmanship and trust in the Philadelphia community. Because of the vast experience that Daniels HVAC has in the Philadelphia area for such a wide variety of heating systems they have become the first choice when diagnostic analysis is needed for heating systems. Whether it is determining and eliminating cool zones or electrical system failure and heat exchange concerns; Daniels vast experience allows him to easily make a determination using state-of-the-art equipment and unmatched expertise to find solutions quickly and accurately. When it comes to diagnostic evaluations, be sure to trust experience over price; many franchise companies send in undertrained day laborers with little experience charging an hourly rate to diagnose different HVAC problems… essentially training on your dime. Be sure to trust Daniels HVAC in Philadelphia and their unmatched 25+ years of experience for all of your heating and air-conditioning needs.

Useful Links

Learn More about Heater Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

Choosing the right HVAC repair company, few tips to consider

Choosing the right HVAC repair company, few tips to consider

exhaust fan vetilationThere are a few things that are needed to be mindful of when it comes to selecting the right HVAC repair company. Turning to an HVAC company you can trust is one of the very first thing, it is after this that you can start thinking of building a rapport in order to facilitate understanding. It is pertinent to note that the benefits enjoyed from your HVAC Repair Company is far beyond repair, you also stand to enjoy other benefits like assistance, personalized advice and long-term savings on home comfort. You need to know whether the company deals with the right kind of equipment, will help you upgrade the equipment when necessary and will give you regular maintenance. Choosing the right company can make a vast difference to the working condition of your system and safe you a lot of stress and money. Highlighted below are a few tips to keep in mind when choosing the right HVAC repair company:

Start with Information and References

One of the best ways to go is to do a thorough investigation about the company. Talk to colleagues, friends and neighbors about the company they are using. Check online for information about the company and visit local bulletin boards, just make sure you are fully equipped with the right kind of information before you choose the right HVAC repair company for yourself. 

Be Aware of their Range of Services

chimney liner systemIt is better to go for HVAC Repair Company that provides both general and specialized repair services like ventilation. It doesn’t matter what the problem is, they are well equipped to provide affordable solution in ventilation in a shortest time frame. They know how to solve problems regarding your HVAC and they have the expertise to do it safely, quickly and professionally. You will be sure of getting preventive maintenance tune-up, dryer ducts through the wall installation, stove exhaust fan and ventilation installation and extensive furnace or AC repairs also chimney liner to vent the exhaust. They will deliver the exact service needed by you with high quality level. They will be able to keep records of your HVAC system, such as repair history so as to help in making the right decisions as far as HVAC service is concerned.

Consider Value and Price

Going for low priced HVAC Repair Company may be better, but there is need to also check the value of what they offer. Cost-effectiveness alone cannot guarantee satisfaction. There is need to think about value and not only price. So, you may need to make sure that the value added to your HVAC is worth paying for bearing in mind the fact that HVAC systems are very complex systems.

Think about the Brand

dryer duct Choose an HVAC repair company with proven expertise in handling your brand of equipment. You can ascertain this by visiting their website. Such a company should be able to offer professional technicians in handling your type of equipment like chimney liner, dryer ducts, stove exhaust fan.

Compare Prices

This is one of the best ways to choose the right HVAC repair company. Get multiple price quotes for you to be able to compare details. With this, you will be able to choose the company that will offer you all-inclusive range of services.

Think about Availability

Do not forget that some cooling and heating emergencies need instant attention. You must choose a company that will be available 24/7 to offer the exact expert service that you need. This will help eliminate any form of stress linked with heating and cooling breakdowns.

Choosing the right HVAC repair company is very possible when you keep these tips in mind. Do not forget that the right support system will optimize the performance of your equipment. With Us, you are sure of getting the best personnel, equipment and services. Contact us today at www.DanielsHVACphiladelphia.com and call us now 267-971-3639 for all of your cooling and heating & ventilation needs.

Central Heating repair

Central Heating repair

man installing ventilation duckYour heating appliances and systems are no different from the expensive cars you purchase. They all need regular repairs and maintenance to keep them running at maximum efficiency for as long as possible. Therefore, you require central heating repair services such as artistry that can install and repair your systems with real profession and precision. An experienced technician will quickly isolate and fix any problem affecting your central heating systems such as heat pumps, furnace or heaters. However, the problem may be so significant that repairing it may cost the same as acquiring a new one.  Therefore, before embarking on repairs, you should determine whether it is cheaper to repair or replace it.

Machines will always develop several faults during usage. Central Heating repairs recommend that you look out for the following indicators of faulty machinery:

  • System failure

It is certainly obvious that your system requires repairs if it stops working altogether.

  • Rise in fuel expenditure

if your heater or boiler is consuming too much fuel, then it needs some check up to ascertain if the increase in fuel consumption is as a result of faultiness.

  • Slow heating

If your furnace machine is taking longer than usual to warm up your house, this is an indicator that it needs repairs to increase its efficiency and improve the total output.  The decrease in efficiency could be because of leakage in the system.

It is not every time that your central heating system fails that you have to call a heating service/repair company. Some of these problems are so minor that you can fix them on your own.  Below are some tips to follow when carrying out a heating system repair.

1  Replace the filter every 30 days

 If the suddenly stopped working, the most likely fault is a dirty filter. You see a dirty filter could trigger system shut down because of overheating. How are Furnaces structured? In such a way that if the system overheats, it runs for only 5-10 minutes before going into safe mode. Therefore, replace its filter and reset the whole system by unplugging and plugging into a power source. Wait for 3-5 minutes before turning on the thermostat.

2  Check the pilot

 If you have an old heater, it is necessary to keep checking the pilot. Why do you wonder? Explosion! If the pilot does not stay on the gas, it could cause an explosion or a fire hazard. Contacting a heating system repair company is always the wiser option!  

3  Check the control board light

The new and improved furnaces have light indicators on their control boards that indicate the presence of any fault or persisting problem.

4  Ensure there is enough gas

It is simple; the furnace cannot function without gas. Therefore, check if enough gas is flowing to the heater.

5  Check the power

Check if both power breaker and transformer are still functional. This way, you can ascertain if power is flowing to the thermostat. 

Remember to seek professional aid for your entire heating system repair before it’s too late. We are here for you 24/7    www.DanielsHVACPhiladelphia.com

Heating repair tips

Heating repair tips

diagnostic testing heater circuit broadYour heating repair appliances and systems are no different from the expensive cars you purchase. They all need regular repairs and maintenance to keep them running at maximum efficiency for as long as possible. Therefore, you require heating system repair services such as artistry that can install and repair your systems with real profession and precision. An experienced technician will quickly isolate and fix any problem affecting your heating systems such as heat pumps, furnaces, or heaters. However, the problem may be so significant that repairing it may cost the same as acquiring a new one.  Therefore, before embarking on heating repairs, you should determine whether it is cheaper to repair or replace it.

Machines will always develop several faults during usage. Heating repairs recommend that you look out for the following indicators of faulty machinery:

  • System failure

It is certainly obvious that your system requires repairs if it stops working altogether.

  • Rise in fuel expenditure

if your heater or boiler is consuming too much fuel, then it needs some check up to ascertain if the increase in fuel consumption is as a result of faultiness.

  • Slow heating

If your furnace machine is taking longer than usual to warm up your house, this is an indicator that it needs repairs to increase its efficiency and improve the total output.  The decrease in efficiency could be because of leakage in the system.

It is not every time that your heating system fails that you have to call a heating repair and service company. Some of these problems are so minor that you can fix them on your own.  Below are some tips to follow when carrying out a heating repair.

1 Replace the filter

 If the suddenly stopped working, the most likely fault is a dirty filter. You see a dirty filter could trigger system shut down because of overheating. How are Furnaces structured? In such a way that if the system overheats, it runs for only 3-5 minutes before going into safe mode. Therefore, replace its filter and reset the whole system by unplugging and plugging into a power source. Wait for 3-5 minutes before turning on the thermostat.

2  Check the pilot

 If you have an old heater, it is necessary to keep checking the pilot. Why do you wonder? Explosion! If the pilot does not stay on the gas, it could cause an explosion or a fire hazard. Contacting a heating system repair company is always the wiser option!  

3  Check the control board light

The new and improved furnaces have light indicators on their control boards that indicate the presence of any fault or persisting problem.

4  Ensure there is enough gas

It is simple; the furnace cannot function without gas. Therefore, check if enough gas is flowing to the heater.

5  Check the power

Check if both power breaker and transformer are still functional. This way, you can ascertain if power is flowing to the thermostat

Remember to seek professional aid for your entire heating system repair before it’s too late. We are here for you 24/7   www.DanielsHVACPhiladedelphia.com

It’s Time to Stop Bringing Winter into Your Home!

It’s Time to Stop Bringing Winter into Your Home!

warming up by a house radiator It’s winter again, and although it’s the time to bring in the Christmas tree and the holiday cheer indoors, you don’t have to bring in the cold weather inside too! Heating Repair Company Philadelphia installs and repairs heating units in your home/business to keep everyone warm and comfortable this cold season. The company understands the importance of installing and repairing your heating system so as to contribute to positively: 

 1. Better Health

 Cold weather, especially when experienced indoors contributes to poor health particularly for the elderly, small children, and people who have been unwell for an extended period. However, a properly functioning heating system will keep your home/business warm and reduce cold-related health problems.

 2. Extended Life for the Heating System

Heating Repair Company Philadelphia realizes the importance of repair and maintenance of your heating system so as to extend its life. It will save costs in buying another heating unit too soon. Besides, depending on the manufacturer, some heating systems need to undergo periodic maintenance so as to uphold the device’s warranty.

 3. Maintains Business Productivity

Adequate warm temperatures in your business will encourage employee productivity as they will not suffer from the effects/discomfort of the cold. Customers will also be comfortably warm enough to browse through your shop for an extended period.

 Choosing a Heating System

The main two factors to consider when selecting heating device are –

 1.     Energy or Fuel Source

You should investigate on the most affordable and available source of fuel or energy so as to determine the type of heating device you would like to install. In Philadelphia, heaters can use propane, biodiesel, heating oil, geothermal energy, electricity, and solar energy which have recently emerged and can save on electricity bills.

 2. Distribution System

Most heating systems use water or forced air already heated. The only difference comes in how the water and air are heated and dispersed around the home/business.

 Hot water based heaters circulate hot water from the boiler to copper piping around the house and provide more uniform temperatures around the building than forced air heaters. The hot water in the boiler is usually for domestic consumption.

 Forced-air heaters distribute the heat through air ducts. It is the most used form of heating in U.S. as this system can be used to air condition buildings, humidify and filter the air.

 However, unless you are building/renovating a house, if the heater is not old, it would be preferable to use the already installed heater that came pre-installed with your home/business, to save cost in installing a new one. However, occasional maintenance and repairs by our company are always the wiser options!

 Our top priority at Heating Repair Company Philadelphia is to ensure your heating system’s efficiency. The more efficient your heating system is, the longer your device lasts and the less the cost of operations which lead to a big difference in total annual costs over the system’s lifetime.

 

Do not hesitate to contact us for a warmer winter! CLICK

Why do you need to carry out maintenance works on your cooling and heating system?

Why do you need to carry out maintenance works on your cooling and heating system?

Heating Repair Company Philadelphia and HVAC Repair Company Philadelphia.

HEATING REPAIR COMPANYApart from the money you spend buying or building the house, installing your heating and cooling system is vital! It is one of the largest investments you will ever make trying in your home. Proper service not only helps keep you’re A/C system running efficiently but also helps to give you’re A/C unit more life and prevent premature replacement. On the other hand, poorly maintained air conditioning systems lead to increased cost of cooling and heating system repair and replacement.

Your repair and maintenance partners Heating Repair Company Philadelphia and HVAC Repair Company Philadelphia will show you why maintaining your cooling and heating system is important. The following are the things that can happen to a poorly maintained cooling and heating system.

 1 Clogging of the evaporator coil

Failure to replace your air filter every 30 days could lead to clogging of your evaporator coil. Apart from leading to poor cooling and heating, this will lead to irreversible damage to your compressor. The result will be high operational costs for repairs and replacement of the compressor.

  2 Failure of the condenser coil

Not cleaning the condenser coil in the outdoor unit for years can lead to its premature failure consequently increasing cooling and heating repair and replacement costs. For your systems to operate at their maximum potential, you certainly need to ensure your condenser coil is regularly cleaned.

 3 Premature compressor failure

Your pets, dogs or cats, should not be allowed to turn the condenser unit into their territory. The deterioration that is likely to result from your canine clawing their paws at the condenser unit may cause poor performance, premature compressor failure, and high operational costs.

  4 Home fires

Your high voltage electrical connections should be done at the highest standards to prevent damage by resultant fires. Not to mention that such fires can cause damage running into thousands of dollars, if not caught on time. Hence why we recommend frequent maintenance works.

  5 Health problems to the family

For both your cooling and heating system, air must flow through the ductwork to give you the required temperatures in your house. However, if your ducts have taken a long time to clean, they may have accumulated a lot of dust and dirt which is passed on to your family’s airspace. This may cause respiratory health problems to members of your family.

hvac maintenance toolsYou may not have the knowledge to do your cooling and heating system repair and maintenance works on your own. No need to worry! Heating Repair Company Philadelphia and HVAC Repair Company Philadelphia is where you need to look for help! We will handle all your cooling and heating repair and maintenance needs.

Using our professionally trained and qualified technicians, we offer professional and affordable services on all kinds for air conditioning and heating brands and machines.

Heating Repair Company Philadelphia and HVAC Repair Company Philadelphia technicians first inspect your heating system before they carry out any cooling and heating system repair or maintenance.

We are exactly what your heating and cooling system requires!

Should I use a Ductless Mini Split HVAC system for my Philadelphia home?

Man installing a Ductless Mini Split - Ductless Mini Split HVAC system installation, maintenance and repair services in PhiladelphiaWith so many different types of HVAC systems available in the Philadelphia area, trust Daniels HVAC to match the right HVAC system for home’s needs. Each HVAC system that is available in the Philadelphia area has advantages and disadvantages. To see if a Ductless Mini Split HVAC system is right for you, we need to look at a couple of quick things:

  • Are you having a room addition built in your Philadelphia home?

  • Are you renovating your attic or basement to a livable space?

  • Do you want the flexibility of having different temperatures in different rooms?

  • Do you have a Philadelphia home that does not currently have air-conditioning?

  • Do you like to save money?

If you’ve answered yes to any of these questions above than a Ductless Mini Split Unit installed by Daniels HVAC may be the perfect choice to provide heating and cooling comfort in your Philadelphia home. To understand what makes the Ductless Mini Split System unique, let’s look at how a Ductless Mini Split System works.

Ductless Mini Split HVAC Overview

A Ductless Mini Split System is a unit that has one outdoor compressor unit that goes to independently controlled pods or units located in each room. Residents in Philadelphia can understand this concept having seen independent radiator heaters or baseboard heaters that have been traditionally used for many years in Philadelphia homes. Because this is a heat pump system the technology allows it to:

  • Pump heat out of the inside of each room independently and pump it outside during the summer.

and

  • Pump in warm air from the outside into each room independently during the winter.

This process of heat transfer is extremely efficient with very few moving parts so maintenance on these types of heat pump systems is very low. To see more about how a heat pump system works click here.


Daniels HVAC has been Serving the Philadelphia area for over 25 years. Call today to see the difference experience can make! (267) 971-3639


Ductless Mini Split System versus traditional heat and air conditioning systems

Adjusting Ductless Mini Split - Ductless Mini Split HVAC system installation, maintenance and repair services in PhiladelphiaA Ductless Mini Split System installed by Daniels HVAC in Philadelphia, in many ways, is more efficient than a traditional forced air heating and air-conditioning system.

A traditional heating system that utilizes a forced air, gas or electric furnace works from a simple concept of heating air and then forcing it into the home through the ductwork. This ductwork has been routed throughout the walls, ceilings and floors of the Philadelphia home. Because the heated air, in some cases, needs to travel some distance to get to rooms within the home it loses some of its heat and efficiency (as much as 30% depending on the insulation used!) In addition, many older forced air heating systems in Philadelphia do not have return vents independent for each room or area creating an inefficient capacity for recirculation and reheating. Traditional forced air heating systems in Philadelphia also can create cool zones (areas that received no heat) within the home based upon how the ductwork was positioned.

A Ductless Mini Split HVAC system eliminates the need for ductwork, therefore instantly it is more efficient than traditional heating system. It additionally will allow for the elimination of cold zones commonly found in traditional heating systems as well. Add to that the advantage of being able to set the comfort level in each room can significantly increase the efficiency and drastically reduce your heating bill. By lowering the temperature in rooms seldom used you can essentially decrease the workload that the heating system needs to keep the home comfortable.

Pro’s and Con’s Ductless Mini Split HVAC system

Cleaning the filters in the Ductless Mini Split HVAC system in PhiladelphiaYou’ve  come to know Daniels HVAC in Philadelphia as a straight shooter over the last 25 years… and were going to be no different here.  In this article we have addressed many of the advantages of a Ductless Mini Split HVAC system; but we should discuss the two disadvantages of this type of system:

The Wall Mounted Unit

Unlike a traditional forced air heating and air-conditioning unit that has a centrally positioned blower, a Ductless Mini Split HVAC system uses independent units mounted on the wall 6-8 inches from the ceiling. Depending on the size and layout of the room, this unit may create a visual point that might not match the style of the room.

Heat Pump Technology

Because the Ductless Mini Split HVAC system utilizes heat pump technology (see article on heat pumps) in extreme cold conditions a backup heating system may be necessary. To keep with the comfort zone advantages we would recommend utilizing an electric baseboard heating system that would only kick in to help keep the temperature at your desired comfort level.

When experience counts

Daniels HVAC has been the Philadelphia area expert in Ductless Mini Split HVAC system installations, maintenance and repair for years. With our reputation and customer service going back 25 years in the Philadelphia area, customers have come to trust our expertise when helping decide which HVAC system will work best in your Philadelphia home. Because there are so many different systems available such as the Ductless Mini Split HVAC system, we can discuss with you your needs, budget and application of your HVAC unit to make sure that you get the very best price for the HVAC unit that will fit your individual need.

Useful Links

Learn More about Heater Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

Professional TIPS for Maintaining your Plumbing System Philadelphia

Professional TIPS for Maintaining your Plumbing System Philadelphia

women calling daniels hvac companyA very important part of your home is the plumbing system and it remains one of the most frequently used also. You are doing so many things that have to do with the plumbing work in the house – you take a shower, visit the toilet, do the dishes, wash your hands, do your laundry and so on. That is not all; the boiler heating in a lot of homes is directly connected to the central plumbing system, take for example, your water heater. Blocked drain is plumbing problems commonly experience at home and they do more harm than good. This is the major reason why you need the help of a professional plumbing repair company that will help to completely remove the chunk of grease or hair that is plugging your drainpipes. But professionals cannot be in your house every time, so you need to know few tips on how to keep your plumbing system running as smooth as possible. Highlighted below are few tips on how to ensure smooth and efficient running of your home plumbing system:

Be Familiar with Your Plumbing System

This is definitely one of the most important things you need to know about your plumbing system. To maintain your home plumbing, you must know where your pipes are located, their direction, which one leads to which one and so on. During renovations or some basic home repair activities, piping can be damaged unknowingly with either nails or staples. You can get stud sensors from any hardware store closer to you to know where water shut-off valve are located and how to turn it off in case of any emergency or when there is need for you to do so.


Keep Your Drains Clean


It is very vital to have your sewage drains inspected and cleaned by a professional on a regular basis. This is necessary to increase their lifespan. It is better and cost-efficient to maintain them than to pay heavily for them to be repaired or replaced pipes.

Avoid Chemical Drain-Clearing Products

You can easily use chemicals to clear your drain pipes, but the truth is they do more damage to the drainpipes than good. It is very amazing to know that some of these problems can easily be corrected with the use of common chemicals, but it might lead to corrosion of the cast-iron drainpipes and because the clog cannot be removed totally by the use of chemicals, there might be reoccurrence of the problem sooner than you expected.

Always Check for Leaks

gas meter / gas pipeingIf you want to enjoy your plumbing system as you should, then you must always check for leaks. Failure to do this will cost you extra bucks as a lot of water will be wasted. Well, it might be a bit cumbersome to do, so the best way to do it is to check the water meter to know the level before going to bed when no one else is using water, then check the meter again when you wake up before anybody else do.

Avoid Future Clogging

The pressure puts by backed-up water on wastepipes badly stress and shortens their lifespan. Try as much as possible to avoid plug-ups by taking good note of what goes down your drains. As much as possible, keep hair out of your bathroom drains, food scraps out of the kitchen drains and things like toilet paper and sewage out of toilets. Prevent buildups by installing screens over drains in tubs and showers and make sure you pull out hair on a weekly basis. Remember, grease is liquid when hot, but solid when cold, avoid pouring grease down the drain.

For your professional plumbing repair company, contact www.DanielsHVACPhiladelpia.com. We are professionals in water heater repair / installation. With us, you will have no regret as we offer guarantees both on workmanship and parts. Our professional licensed plumbers adhere strictly to all plumbing codes.