SuperAdmin

Steps to take to reduce your heating bill this winter

by

Steps to take to reduce your heating bill this winter

heating repair philadelphiaThere is no reason why you should wait till you get that astronomical heating bill for you to take action. If anything, it will be too late to take action. By taking deliberate measures now, you should be able to reign in that heating bill. Here are critical steps you may want to take:

  Check the heating ducts and insulations

You don’t have to be an expert to crawl down the basement and up the attic to inspect your air ducts. Dust tends to manifest itself as black smudges around the duct joints and in your insulation. This can only mean that a lot of air is leaking through the spaces leading to wastage of energy. Why should you allow hot air to go out where you don’t want it? Get some metal-backed tape from a hardware store and repair the duct leaks.

Is your insulation enough and is it located in the right places? If you have any air ducts in cold places, consider insulating them. Any water pipes running in the attic or under the house should be covered with piping insulation. Cover your water heater with an insulating blanket, which you can find in any hardware shop.

  Sealing off your home

There are many openings in your home through which heat may escape. These include windows and doors. If there are any leaks around your door openings, ensure you install door sweeps. Seal all the gaps around your windows to ensure you save money on your energy costs. Your walls have electric outlets where you need to apply seals in the form of gaskets. To cap it all, ensure you install storm windows in place of your normal window screens.

  Cleaning the vents

To prevent more heat from escaping from your home, you need to clean your vents and registers. The aim is to increase the airflow and in turn make your heating system more efficient. Watch out for the air intake to your furnace. Replacing the air filter will help you to ensure there is nothing blocking your furnace. Cleaning the blades of your ceiling fans should also make it more efficient to deliver hot air into your home.

  Getting the heating system inspected

Before winter sets in, have your heating system inspected and serviced by a professional. A professional maintenance company will help you ensure that the system remains efficient when needed. If there is any maintenance or repairs needed, the professional will take care of it. That way, you will ensure that your system doesn’t fall apart in winter. If anything, you want to avoid unnecessary repairs and replacements at the most critical times.

  Buy fuel early

To avoid paying a premium, ensure you buy your fuel in summer. By carefully shopping around, you should be able to find a supplier that will help you fill your gas tanks cheaply. In winter, the demand for fuel is so high that prices can be unreasonably high.

Why should you wait till you get your winter heating bill before you act? Do something about it now!

Daniels HVAC and Home Service is your first and best choice for Furnace replacement in Philadelphia

Useful Links

Learn more about our furnace service Services in Philadelphia – Click Here

Learn More about Daniels HVAC in Philadelphia – Click Here

See what people are saying about us – Click Here

 

5 features of a Facility Maintenance Company

by

5 features of a Facility Maintenance Company

hvac system How is the facility maintenance company you have been engaging for work in your home? Are they the punctual type or the kind that shows up late for work? Can you say they have given you the best services, so far? Finding a facility maintenance company that will give you the best services shouldn’t be much of a hassle. After all, you don’t have to spend lots of time dealing with maintenance issues when you have pending work and personal issues to deal with.

The following are things you should look for when hiring a facility maintenance company:

1  Quick response to your requests

There is nothing you will appreciate like a facility maintenance company that responds urgently to your call for services. You need to be confident that they care about your maintenance issues as much as you do. If their staff is well trained, you will be sure they will treat your work with so much importance that they will show up on time. Besides, they should be able to complete the work with great efficiency. Giving you a follow-up call is one way of relieving you of stressful situations.

2  Meeting your needs

After maintenance work, the company should be able to check for any needs they haven’t met. This may involve talking to customers as well as employees. The maintenance company leaves you with the freedom to deal with your clients and have some personal and family time.

3  Leaving nothing out

To be sure they have carried out the task you asked of them in its entirety, a facility maintenance company should give attention to detail. As soon as the job is complete, they need to carry out tests so they don’t miss anything. Since they are in charge of the job, they should have no problem taking ownership of any problems that may occur.

4  Service beyond normal

When you are working with a great facility maintenance company, they should be able to give you service around the clock. It wouldn’t matter whether it’s night or day; the company will be there for you always. As you know, emergencies can happen at the least expected time. It could be in the morning, midday, evening, or late at night. A facility maintenance company should be at your beck and call, twenty-four-seven. You may be away on holiday but the company isn’t.

5  High understanding of the job

The facility maintenance company you hire should be one whose top management is abreast with the industry in which they operate. The company will better understand your needs if they have worked on such a job before. Part of the required experience involves hiring and managing service suppliers and vendors. Since they know what you want, they are able to empathize with your unique needs and daily challenges. It’s only a facility maintenance company that takes this approach that can give you the best service.

What’s it that you want a facility maintenance company to do for you? Don’t be afraid to give us a call when you have an issue with your HVAC system. If anything, we can provide maintenance services before an emergency occurs.

Useful links

Learn more about Daniels HVAC in Philadelphia – Click Here

Learn More about  Heating Repair and Installation Services – Click Here

Contact us today – Click Here

 

 

5 Reasons Why You Need Regular Furnace Repair and Service

by

5 Reasons Why You Need Regular Furnace Repair and Service

furnace - heaterThere are many things you should do before the cold season sets in. Yet repairing and servicing your furnace should be top on your priority list. You don’t have to wait until your furnace is totally ruined before you do something about it. With some seasonal maintenance of your furnace, you should have it up and run efficiently throughout the winter. The following are some of the reasons why furnace repair and service is necessary:

  Improved efficiency

You have every reason to do everything you can to have an efficiently working furnace. One of these are the energy costs you will save. However, that can only be possible with regular Furnace repair and service. After all you want to ensure your furnace is cleared of dust, dirt, and other debris. Such simple acts should make your furnace 20 percent more efficient. In addition, you need to inspect, adjust, and lubricate all the important parts of the furnace.

  Better safety

The many things you do in your home should ensure that you keep your home safe. After all, furnaces produce heat by burning fuel. Any cracks in the fuel area can cause leaks which could end up causing accidents that compromise the safety of your home. Some of the things you will have to do include testing safety controls, cleaning or changing air filters, and checking the heat exchange. Proper furnace repair and service is exactly what you need to heat your home without compromising safety.

  Checking utility bills

Regular furnace repair and service is the way to ensure that your furnace runs more efficiently throughout the cold season. Some of the thing done at this time might seem mundane but are important all-the-same. They include:

  • tightening electrical connections,
  • lubricating moving parts,
  • measuring the correct air flow,
  • inspecting and adjusting blower components,
  • inspecting gas pressure, and
  • inspecting the evaporator coil and condenser.

When every part of the furnace is working at full capacity, you will be able to keep your utility bills at manageable levels.

  Extended life of equipment

If you have a furnace, you know how expensive it is. That’s why you need to do everything to repair and service it. Furnace repair and service should be able to help you to expand the lifespan of the unit. It isn’t rocket science. Routine actions such as lubrication of moving parts, testing the ignition area, and inspecting and cleaning drains are all you need to extend your furnaces lifetime. Your furnace will keep running better for many years to come without requiring replacement. That way, you are assured to keep warm throughout the cold months.

  Fewer repairs

Scheduled furnace repair and service will enable the technician to fully examine your furnace to discover small problems. That way, you can nip such issues in the bid before they grow into those requiring major repairs. Ensure that you clean, lubricate, and assess your furnace so it keeps running at peak performance. There will be fewer breakdowns and problems during operation.

Clearly, you don’t have to wait for long before doing furnace repair and service.

Daniels HVAC and Home Service is your first and best choice for Furnace replacement in Philadelphia

Useful Links

Learn more about our furnace service Services in Philadelphia – Click Here

Learn More about Daniels HVAC in Philadelphia – Click Here

See what people are saying about us – Click Here

 

5 Reasons for Using a Licensed Electrical Repair and Service Contractor

by

 

electrical testing and repair5 Reasons for Using a Licensed Electrical Repair and Service Contractor
Have you ever tried to do electrical service yourself or using an out-of-work electrician? How did the work go? Most likely, you ended up incurring extra costs as a way of getting what you paid for. That’s by paying a licensed contractor to do the work you wanted to be done in the first instance and also correct mistakes that may have been caused. So why shouldn’t you just hire a licensed contractor from the get-go? The following are reasons why you should work with a licensed electrical repair and service contractor:
1-Certification
Before they are licensed, contractors have to undergo rigorous training to prove their capability to provide safe and professional services. With such a contractor, you are sure you are hiring someone who will do your kind of work the way you want it. Having a safe pair of hands doing electrical repair and service in your home gives you peace of mind.
2-Proper training
Most of the time, you should hire a contractor who has the training to do the type of work you have. But how will you know you have the right person when they are not licensed? It’s the license, which acts as proof of the skills, knowledge, and experience a contractor possesses. They know how fast and at what cost your work should be done. If anything, they can advise you on the best electrical repair and service practices as well as the materials required. They can help you trace the root cause of a problem and in the process save you a 3-lot of time and money.
3-Understanding building codes
In an effort to remain licensed, contractors make an effort to be up to date with the prevailing national, state, local codes. The aim of the codes is to ensure safety, function, and proper installation. It is, therefore, to get the requisite inspections arranged and the permits approved when you are using a licensed electrical repair and service contractor. When you have permits, you can be sure the installation is in conformity with prevailing codes. Also, the project you are undertaking is verified to be adding value to your property. If you have any insurance claims, you can be sure they will be paid.
4-Worker’s compensation
Using an unlicensed contractor is very risky. If any of their workers gets injured in your home, you will have to pay the damages. It even gets worse when the insurance company denies your claim because of using an unlicensed contractor. So why not just hire a licensed electrical repair and service contractor who also has a worker’s compensation insurance policy?
5-Warranty
When a contractor is licensed and reputable, they tend to stand by their work and even give a warranty. This is because they are confident the work they did will be able to hold for a specified period. Where any problems occur in the intervening period, they will come and carry out repairs free of charge.
Clearly, you understand reasons for hiring a licensed electrical repair and service contractor.

Useful Links

Learn more about our electrical repair services Philadelphia – Click Here

Learn More about Daniels HVAC in Philadelphia – Click Here

See what people are saying about us – Click Here

Cheaper heating costs this winter

by
  • Turning down the thermostat

thermostat inspection and repair or installationIt doesn’t to be very drastic. Turning your thermostat down by just a few degrees won’t have that great an effect. In fact, you will end up saving between 5 percent and 10 percent of your heating bill this winter. What’s the point of leaving your heat on when you leave your home for several hours? Turn it down and you will notice the difference.

  • Watching your water heater

Your aim isn’t just to save heating costs but the overall energy costs in your home. In fact, there is no harm if you turn down your water heater to say 110 degree from 130 degrees.

  • Using a programmable thermostat

Don’t worry about the cost of buying the thermostat. It might cost you up to $100 dollars but you should be able to recover that in just one year. With a programmable thermostat, you will be able to adjust the heat to a predetermined schedule. That way, you can lower the heat when you are not at home or asleep.

  • Stopping heat from escaping

Are you the type of person who leaves your windows open when the heat is on? Keep them shut. If you have a fireplace that you don’t use frequently close the flue and ensure glass doors are in place. How else will you minimize heat loss? If you have ventilation fans in your bathroom and kitchen, turn them off. Why should you have them on when you don’t need them, anyway?

  • Calling for a checkup

If you want your heating unit to run more efficiently, you should ensure you properly maintain it. That’s especially if you have an electric or oil heater. The rule of thumb is that maintenance should be done at least once a year. As for the gas heater, you can carry out maintenance every other year. Yet there are things you can do on your own such as checking the filters and ensuring they are clean. With dirty filters, you should only expect high heating costs.

We, there you have something to start you off to cheaper heating costs this winter.

Useful Links

Learn more about our furnace service Services in Philadelphia – Click Here

Learn More about Daniels HVAC in Philadelphia – Click Here

See what people are saying about us – Click Here

 

The reason you’re losing money while heating your home

by

 

heating repair philadelphia paThe reason you’re losing money while heating your home
The major reason why you are losing money while heating your home is heat loss. It doesn’t matter if you have a new home or an old one. Heat loss can be a major problem that could lead to an escalation of the warmth required. When it’s excessive, heat loss is a major factor in rising energy use which leads to higher heating bills.
You may want to define heat loss as the instance when heat escapes from inside the building to outside. It could be through the walls, windows, roof, and floor. Understanding the source of heat loss in your home can help you get the most efficient heating system for your home. That way, you can be certain your home is adequately heated.
Going with underfloor heating is an option if you understand the kind of heat loss in your home. That’s especially if the heat loss is low. It means under flow heating will work just well enough. However, high heat loss calls for ways of ensuring the efficient performance of the system. Simply put, look for ways to reduce heat loss and by extension energy requirements and costs.
Now you know why you are paying so much money to run your heating system. But it doesn’t have to be like so forever. With a few simple steps, you can reduce energy loss that occurs through the escape of heat from your home. You only have to ensure that the output of your heating system is greater than the heat loss. It’s as simple as doing the following:
Reducing heat escape through open spaces
It requires no explanation that your home needs proper ventilation. In fact, that’s why you have your doors and windows. However, keeping them open all the time can lead to lots of heat escaping from the house. So ensure your doors and windows are open for a minimum length of time in a day. If you have many windows, you may want to open only one or two.
Improving the insulation of your home
Here is a major thing you can do to prevent heat loss through walls, floors, walls, roofs, and windows. Install new installation if you must. Where your house already has existing insulation, you may want to fill in any existing gaps. In most new houses, the floors will be insulated by the time you are moving in. as for the walls, you may have to install insulation materials in the cavities. The trick is to ensure that no space is left in the insulation. You might also use insulation boards on the walls to complete the work. Insulate the ceiling or loft to ensure there is no heat escaping through gaps in your roof. The aim of this is to reduce the movement of upwards through the roof. Lastly, you can use double or triple glazing on your windows to ensure they are insulated enough to prevent heat loss.
Conclusion
Preventing heat loss will certainly cut on high energy costs. However, that’s not enough. You may have to invest in an efficient heating system to ensure you cut on energy consumption. An efficient system will help you minimize heat loss and lower your monthly costs.

Useful Links

Learn more about our furnace service Services in Philadelphia – Click Here

Learn More about Daniels HVAC in Philadelphia – Click Here

See what people are saying about us – Click Here

7 ways to go green in your home this year

by

 

  7 ways to go green in your home this year
going green eco greenConservation of the environment is a topic that people just can’t stop discussing. While there is need to go green as a human population, starting in your home can take this much further. The only problem is that most people just do not know how to start. If you are looking for ways to go green this year without spending so much, there are a few suggestions for you. Here we go!
  Simply give up the junk
As much as recycling is good, avoiding paper waste altogether is the way to go. Do everything to ensure you minimize paper waste as much as possible. It could be as simple as going paperless for all your credit and bank accounts. Use online billing as much as possible.
  Energy conservation
You will not just save on your energy bills by conserving energy but also conserve the environment. You may want to adjust your thermostat a few degrees higher in summer and lower in winter. Using energy-efficient bulbs for all your lights should go a long way in conserving the environment. If you can, try washing with out hot water and drying your clothes on the lines.
  Minimizing your use of water
As much as you love long showers, you don’t want to be the one spoiling the environment. Even so, who likes paying huge water bills? So, make your showers as short as possible. Take control by installing a low-flow shower head and faucet aerator to conserve water without losing pressure.
  Using less gas
There are many ways to cut on your gas. You might want to take local trips s compared to traveling for long distances. If you can, start a carpool for your office. Consuming less gas is not just great for the office but can also help you save some money. Walking or biking should help you keep fit. So, why not try it?
  Minding your purchases
Many are the people who just cannot stop buying things they don’t need. Doing this only creates wastes you could have avoided. So, borrow if you can. Whenever you buy, try to invest in reusable and high-quality items. Things you can borrow include books, power tools, and rarely used appliances. It’s better to have reusable water bottles, grocery bags, envelopes, and packaging cartons.
  Proper disposal of electronics
Use your laptops, phones, batteries, and other electronics as long as you still can. When you need to dispose of them, ensure you follow the guidelines provided by your local authority. It might be easier and less time-consuming to just throw them in the trash but it isn’t good for the environment. So, why not follow the guidelines from your local authority to the letter. That way, you will be proud you did something   good for the environment.
Avoiding chemical household cleaners
It’s a given that household cleaners are tough on germs. However, they contain harsh chemicals which can cause serious damage to the environment. That’s why you should switch them for green cleaners for a clean and green home this year.
Clearly, all the efforts you make to go green this year aren’t just good for the environment but for your wallet too. So, go green like never before.

Useful Links

Learn More about Air Conditioning Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

Plumbing repair service Philadelphia

by

 

picture of plumbing fixture5 common problems that necessitate plumbing service repair and maintenance
Most homeowners or renters have a few vital tools to take care of minor plumbing emergencies. Some issues such as a clogged toilet or slow drain may require a little elbow grease to take care of it. However, bigger issues may require the hiring of a plumbing service repair professional. Even if the problem is small, trying to do it yourself may lead to an even bigger problem. That’s where a plumbing service maintenance specialist comes in handy. Here are some of the most common jobs that require a plumbing service repair specialist:
1-Dripping faucets
A dripping faucet can be a nuisance when you are trying to sleep. That’s in addition to driving your water bill higher than usual. With a dripping faucet, you can be sure to send hundreds of gallons of water down the drain, annually. In most cases, it’s the pressure of the incoming water that wears out the washers allowing a tiny trickle of water that causes the drip. A plumbing service repair specialist should be able to help you with this. They will not just check the dripping problem but also ensure plumbing system is well maintained.
2-Low water pressure
This is manifested when water gushes out of your taps only in trickles. That doesn’t mean there is any problem with your pipes but the municipal water supply would be to blame. Also, there might be a build-up of sediments and deposits in the faucet aerators leading to diminished pressure. Although there are a few issues you could solve on your own, calling in a plumbing service maintenance specialist is the best way to go about it. Especially so it the low water pressure is caused by a leak in the piping system. You definitely need a plumbing service repair specialist to pinpoint the problem.
3-Running toilet
After a long time of use, the toilet may become hard to stop after flushing. This could be an indication of a bigger problem with the inner system. Solving the problem may require the replacement of the flapper valve to allow water to pass from the tank to the toilet in a proper manner. While you might want to use a toilet repair kit, it’s much better if you called in a plumbing service repair specialist. Unlike you, they have worked with these systems before and understand just how to go about the repairs.
Without mattering exactly where the problem is leaks can be very costly in the long run. As a layman, you might not know exactly how to do the repairs. Unlike a plumbing service maintenance specialist, you just cannot tell whether it’s the pipe that should be replaced if only the joint. So ensure you get the best services available.
5-Slow or clogged drains
Clogs usually become apparent when the water in your sink cannot totally go out. While you can use a plunger to apply pressure to unclog the drain, it’s usually good to call in a plumbing service repair specialist to help you out. A professional will be able to take a comprehensive look at your entire drainage system to ensure the problem is adequately dealt with.
So always be on the lookout. You never can tell when you will need a plumbing service maintenance specialist.

Useful Links

Learn more about our Water Heater Replacement Services in Philadelphia – Click Here

Learn More about Daniels HVAC in Philadelphia – Click Here

See what people are saying about us – Click Here

Central Air conditioning Freon leaks & repair

by

 

old air conditioning service value leaking freon3 causes of air conditioning Freon leaks and how to carry out the repair
Have been experiencing a decrease in the performance of your air conditioner recently? Well, it might be the time you had your AC unit checked for a likely refrigerant leak. Your AC unit comes with refrigerant lines that are commonly filled with Freon, a substance that plays a critical role in cooling your home. You don’t have to wait until it is summer and hot to have the leak fixed. You need to learn a lot about air conditioning Freon leaks and repairs. If anything, you need to know how to stop a Freon lead from occurring. But first the common causes of air Conditioning Freon leaks.
AC installation
Working with an inexperienced technician for your AC installation with only mean you getting a shoddy job. When an AC is installed poorly, it will not just have performance problems but also suffer from Freon leaks. Leaky newly-installed AC units require being assessed by a trained repair professionals. These are the people who will not only diagnose the leakage but also solder the puncture point. That’s before refilling the refrigerant to the level required. Since you want to save money, avoid air conditioning Freon leaks and repair by hiring qualified AC installation personnel.
Metal corrosion
The metal used to make your air conditioner will eventually wear out through corrosion. Blame this on formic acid or formaldehyde which has a corrosive action on AC metallic parts. This is a slow process that eventually punctures the refrigerant containing coils, causing Freon leaks. To get your AC working again, talk to air conditioning Freon leaks and repair experts near you. They should have the knowledge and ability to isolate and remedy such damages on your AC system. Containing the leakage improves the efficiency and performance of your AC unit for continued comfort at home.
Manufacturing defects
Purchasing an AC unit isn’t something you should take upon yourself if you are not an expert. Engaging a knowledgeable and renowned AC installation, maintenance, and repair expert ensure you avoid buying one with manufacturing defaults. The only problem is that you might already be a victim. Where that’s the case, talk to an air conditioning Freon leaks and repair professional to fix the problem. Otherwise, have your AC system replaced if it’s covered by warranty.
Conclusion
Freon leaks may look simple but have the potential to affect the level of comfort in your house this summer. Your AC system requires having the refrigerant to the required level so as to function effectively. After all, you require the temperature inside your home to be kept at the required level. If you are experiencing Freon leaks, ensure you hire an air conditioning Freon leaks and repair expert to work on your AC system. They will identify the point of leakage, repair it and refill the Freon. Don’t handle Freon on your own. It’s a toxic substance that shouldn’t be handled by anyone other than by a trained professional. So, why not talk with a professional near you?

Useful Links

Learn More about A/C Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

Air Conditioning Freon Leak Repair Service Philadelphia

by

Air Conditioning Freon Leak Repair Service Philadelphia

picture of freon leak detector deviceTrying to fine a air conditioning Freon leak will take some valuable time & work, replacement of a coil, maybe the line set, reclaiming the Freon, triple vacuum and recharging with new Freon. We don’t reuse the old Freon because it may be putting trouble back in the system. We have found that the old Freon may have non-condensable or acid in it.   R22 is now more expensive these days. Maybe an independent AC guy will be cheaper but you get what you pay for. A professional repair service like Daniels HVAC Philadelphia company you get the value of knowledge, schooling, certifications, and the right tool investment, insurance, guarantee. In other words, we don’t use any band-aids.  

About that AC guy most leaks come from poor installation practices or taking short cuts.. that why we say you get what you pay for !

$1000 could be a bargain in some cases. $1000 to $2000 to fix a leak sounds a bit high, sometimes repairing a leak can be a daunting task, other times its a simple matter. I would definitely suggest you get a couple of estimates. Many companies do not like to repair leaks and would rather replace the unit. So, they give high estimates other companies will try to sell you on a quick fix like adding stop leak. Please beware your unit should only have Freon in it not other stuff.

To do the job right to get a roundabout cost of a Freon leak repair. 1-A few things you will need to keep in mind new Freon is a must. The average unit take about 6-8 lbs of Freon at around $90 lbs. 2-The time it take to search for the leak like taking the unit apart. 3-Recovery of the Freon and pressure test for leaks or using a leak detector and or adding die to the unit. 4-Triple vacuum. Also, pressure test with dry nitrogen than test again with dry nitrogen. 5-Don’t forget to try and fix it with the brazing of the joints with dry nitrogen running in the system. 6-Maybe replacing of a part or two.

When there is a leak or leaks, MOST of the time the Freon is leaking around the coils, which are EXTREMELY expensive to replace. We’re talking about a roughly $2000 repair job to replace the copper coils, when you can get a new system for $4000. In cases where your system is 10 years old, replacing the coils is foolish anyway as the system may not be good for much longer.

So when someone quote the price $1500 to repair Freon leak that’s some of the things they will most likely be thanking of. So, leak repair or leak detection is possible to be done you just have to get the right person to do the job. Hopefully you will get positive results.

Useful Links

Learn More about A/C Repair Services offered By Daniels HVAC Philadelphia – Click Here

See what our customers are saying about our HVAC Repair Services Philadelphia – Click Here

 

Website by Modern Web Studios